The inner and outer rings have tapered raceways, and there are tapered rollers between the raceways. If the tapered surface is extended, it will eventually converge at a point on the bearing axis. Tapered roller bearings are mainly used to bear combined radial and axial loads, mainly radial loads. The axial load carrying capacity of the bearing is determined by the contact angle, the larger the antenna angle, the greater the axial load carrying capacity. Tapered roller bearings are separable bearings. The inner ring with rollers and cage constitutes an inner component, which can be installed separately from the outer ring. This kind of bearing can limit the axial displacement of one side of the shaft or the housing, and does not allow the shaft to tilt relative to the housing hole. Under the action of radial load, additional axial force will be generated. Therefore, generally in the two bearings of the bearing, the outer ring and inner ring of the bearing are installed corresponding to each end face.